Intro to Products

ETHYLENE

Ethylene is a typical basic raw material in the petrochemical industry and produced by the pyrolysis of hydrocarbons (Naphtha, Ethane, LPG, Gas Oil, etc.) such as petroleum or natural gas. It is an olefinic hydrocarbon containing 2 carbon atoms and also known as ethene.
It is a colorless gas slightly lighter than air at the ambient temperature and pressure.

CAS number : 74-85-1 / Molecular formula : C2H4

Plant processes

This plant cracking naphtha with steam into the light hydrocarbon compound at a high temperature in excess of 800℃, and quenches, compresses and refines it to produce ethylene, propylene, mixed C4, pyrolysis gasoline (PG), etc.

  • Cracking Heater Unit
    This unit cracking naphtha with steam in a cracking furnace into the hydrocarbon compound with less carbon at a high temperature in excess of 800℃, produces high-pressure steam with the heat of the high-temperature cracked gas and sends it to the quenching unit.
  • Quenching Unit
    This unit cools down the high-temperature cracked gas from the cracking furnace with quench oil, fractionates heavy fuel oil (PFO, PGO), and cools it down with quench water. the quenched substance is sent to the compression unit.
  • Compression Unit
    To economically fractionate and refine the quenched cracked gas, this unit uses the compressor to raise the pressure to about 38 kg/㎠G.
  • Fractionation Unit
    This unit cools down the gas compressed by high pressure at a super-low temperature (-165℃), and uses the differences in boiling points to fractionate hydrogen, ethylene , propylene , propane, mixed C4 and pyrolysis gasoline (PG), etc.
Product uses

Ethylene is produced at the ethylene plant (NCC) and utilized as the raw material for various synthetic raw materials, (HDPE, LDPE, LLDPE), synthetic resins and Synthetic Rubbers, etc.

  • Linear Low-Density Polyethylene(LLDPE)
  • Synthetic Resins(HDPE, LDPE, LLDPE, etc.)
Product inquiry
Product inquiry List
Product Speciality Contact person Phone number Inquiry
ETHYLENE 천용수 과장 82-2-6050-2486 Fax.Mail inquiry
Properties
Specifications List
Test Item Unit Test Method Specification
ETHYLENE M-% ASTM D 2505 MIN 99.9
METHANE & ETHANE M-ppm ASTM D 2505 MAX 500
C3S & HEAVIER M-ppm ASTM D 2505 MAX 10
ACETYLENE M-ppm ASTM D 2505 MAX 5
CARBON MONOXIDE M-ppm ASTM D 2504 MAX 5
CARBON DIOXIDE M-ppm ASTM D 2505 MAX 5
OXYGEN M-ppm ASTM D 2504 MAX 5
HYDROGEN M-ppm ASTM D 2504 MAX 5
HYDROGEN SULFIDE M-ppm ASTM D 7652 MAX 2
WATER M-ppm DEW POINT MAX 5
METHANOL Wt-ppm BY GC MAX 10

* The above specifications represent standards may differ from the actual subject matter.